g_3_b

Discover the Best Swimming Goggles that Gives you the Power to See Under Water

Best Swim Goggles You Can Buy in 2020

Every swimmer should wear goggles over their eyes. It doesn’t matter if you’re swimming outside or inside. Goggles protect your eyes from all the contaminants and irritants that may be in the water, such as salt, chlorine, insecticides, pollution, and so on. Plus, goggles make it so much easier to see underwater.

Now it is true that everyone has a differently shaped face, at least to some extent. That is why a pair of goggles that work well for one person might not work well for another person. You certainly don’t want your goggles to be too tight. Not only are tight goggles uncomfortable to wear, but the circumference of your eyes will be left with red rings. Goggles should be just tight enough to stay on your head but not be uncomfortable.

Unfortunately, not all goggles are made equal. Some goggles fall apart easily while others stay secured to your head the entire time you’re swimming. To find out which goggles are the best to use for swimming, we’ve researched what expert swimming instructors had to say about it.

Best Swimming Goggles

Speedo Vanquisher 2.0

Speedo is a brand name known by competitive swimmers everywhere. They create some of the finest Olympic quality fins and swimsuits on the market. Swimmers of all competition levels have used Speedo’s swim gear for years now.

The brand’s newest creation is the Speedo Vanquisher 2.0. It is the number one pair of goggles on our list for a reason. They fit wonderfully on the swimmer’s head without sticking out or causing resistance against the water. If you have trouble with the fit, there are four different interchangeable nosepieces which you can choose from to accommodate the shape of your face. Also, you don’t need to worry about the goggles falling off in the water because they include two silicone straps which do a good job of staying around your head the entire time.

When swimming in an outdoor pool environment, the lenses of the goggles provide UVB and UVA protection to your eyes against the sun. Choose between more than 13 different colors until you locate the right pair which suits your needs.

Speedo Adult Swim Goggles Anti-Fog UV Protect Latex Free 3 Pack

On Amazon.com

Resurge Sports

Competitive swimmers demand goggles which don’t leak easily or slip off their heads after a minute of swimming. Sometimes the elastic band of the goggles will snap if you try to secure it too tightly on your head. Fortunately, you don’t need to tolerate this nonsense anymore. The Resurge Sports goggles are a perfect choice for any competitive swimmer.

In fact, the Resurge Sports goggles are Amazon’s Choice too. They’re suitable for swim meets, triathlons, and basic recreational swimming. The elastic strap is as stretchy as a bungee cord, so it’ll stay comfortably secured to your head without snapping. The lenses give you a wide enough range to see the other swimmers in your peripheral vision. There are three different interchangeable nosepieces to accommodate children of different ages, starting from 10 years old.

Zerhunt

Zerhunt is an affordable pair of goggles which give you quality features too. It offers protection against UVB, UVA, and leaks. It is even fog-resistant too, so you’ll always see where you’re going in and out of the water. Perhaps the most innovative feature is the clasp that keeps the goggles secured to your head. There is no elastic band which gets caught in your hair like regular goggles have.

Zerhunt has a wide-angled lens which enables you to view peripherally, which is a major plus. Other items included with the goggles include earplugs, a carrying case, and nose clip.

Aqua Sphere Kayenne Swim Goggles

Do you prefer indoor swimming? If so, then you need goggles which offer clear lenses without any colors or mirrors on them. It is easier to see through clear lenses when you’re swimming indoors, especially if the environment is already lit up. That is why you should consider the Aqua Sphere Kayenne Swim Goggles. They make it easier to move in the water while maintaining your peripheral vision quite clearly. The lenses won’t fog up or get scratched either.

In addition, the Aqua Sphere gives extra comfort to long-distance swimmers because the goggles are oversized and fit perfectly on most sized heads. The side of the goggles has a button that you can press to adjust the fit more. This will save time from having to mess around with the straps in between laps.

aegend Swim Goggles, Pack of 2 Swimming Goggles No Leaking Anti Fog UV Protection Crystal Clear Vision Triathlon Swim Goggles

On Amazon.com

Speedo MDR 2.4 Polarized Goggles

The Speedo MDR 2.4 Polarized Goggles is designed for open water swimmers. These could be swimmers in the ocean or conducting some intense triathlon training. Anytime that you’re swimming in open waters, you’re facing obstacles like a darker environment, longer swimming duration, and reduced vision. For this reason, you need goggles which have polarized lenses that give you clearer peripheral vision under these conditions. That is what the Speedo MDR.24 can do for you.

You won’t need to worry about the fit, thanks to the TPR frame flexibility and innovative elastomeric technology included. Many customers have already praised the goggles for their comfort and fit in the water after several hours of use.

Phantom Aquatics Panoramic Scuba Snorkeling Dive Mask

It is easy for water to go up your nose if you’re free diving or swimming aggressively. That is why your nose must stay covered always. Why not look for a swim mask which has a nose piece included?

The Phantom Aquatics Panoramic Scuba Snorkeling Dive Mask is an ideal mask for any diver. The lenses provide a panoramic view of everything going on under the water. If you need to make a quick adjustment to the mask on your head, you can push a side button within seconds to do it. Thanks to the wide split straps, the goggles should stay securely on your face. There is very little chance of leakage as you’re swimming underwater.

Aqua Sphere Kayenne Junior Swim Goggles

The Aqua Sphere Kayenne Junior Swim Goggles are designed to allow children to see clearly under the water. The lenses are oversized over the eyes, so it is easy to see in multiple directions without needing to make constant adjustments. But when adjustments do need to be made, just use the side buckle for easy loosening or tightening of the straps.

As a bonus, the lenses offer UV protection and anti-fog technology to keep your kids seeing clearly in an outdoor swimming pool.

aegend Swim Goggles, Swimming Goggles No Leaking Anti Fog UV Protection Triathlon Swim Goggles

On Amazon.com
0
81xm8-e1FYL._AC_SL1280_

Enjoy the soothing nature of a beautiful water feature With a Pool Fountain

Best Pool Fountain You Can Buy in 2020

Best Swimming Pool Fountains: Are you one of those consumers seeing a way to make your swimming pool look magnificent? Maybe your pool has a substantial frame and a backdrop of sky-blue vinyl. Do you have a swimming pool that resembles the same as every other backyard pool. I know where your coming from. You could construct a deck around it or place stones and perennials around the foundation. But going this course can be not only time-consuming but costly too.

A more solid and quicker way is to supplement a little something more to your swimming pool space. Simply combine an pool fountain to it. There are so numerous to decide from. But you ought agree with me a pool fountains is the most solid way to go. One that shifts colors, floats in the pool, and sprinkles water out of various jets is a lot more natural on the eyes, don’t you agree.

To view how a pool fountain can improve your swimming pool, why not take a peek at these different pool fountains? You can begin by checking out are top swimming pool fountains.

Fortunately, a pool fountain is an attractive addition which doesn’t cost much money. On top of that, it can really enhance the aesthetics of your pool area considerably.

Top Swimming Pool Fountains

1. Magic Pool Fountain Color LED Bulb

2. GAME Underwater Light Show & Fountain W/Remote Control

3. OKMEE Solar Fountain Solar Powered

What are Poolside Water Fountains

There are different kinds of pool fountains to choose from. We’re not suggesting that you hire a stone masonry expert to craft you a fountain from scratch. You can choose a smaller fountain which can be installed quickly. These fountains are available for either above ground or inground pools.

Advantages of Pool Fountains

So, what are the benefits of installing a pool fountain?

Cools the Pool Temperature

During the summertime, people like to get into their swimming pools simply to cool off. If the blazing sun has heated up your pool water, it’ll take away the coolness from the water. To fix this problem, you can install a fountain which provides aeration to the water.

As the fountain sprays water from the pool into the air, all the water droplets make contact with oxygen and get cooled down. After the droplets land in the pool water, they lower the temperature of the water because of how cool they are. Keep the fountain running for a while, and the temperature of the entire pool should drop at least 2 degrees. But if you add a few more fountains to the pool, then perhaps you could lower the temperature of the water even more.

Water Circulation

Every pool needs good circulation to move around the chemicals and sanitizers in the water and distribute them evenly. More importantly, circulation is how water enters the filtration system so that it can stay clean. Pumps are primarily used for creating this circulation.

However, a pool fountain can add a lot of circulation too. The more fountains you add to your pool, the more circulation it will have. Just make sure your pump is working because the fountains can’t work without it.

Stress Relief

People love the sight of water. They also love to hear water splashing down onto other water. Research has shown that water sounds like this can actually reduce stress and make people feel calmer. One fountain installed in your pool should make you feel a lot better. You can just sit and listen to it, and you’ll start to feel your stress going away.

Fun

It is entertaining to watch the fountain spray water into the air and then have that water splash back down. It almost creates a rainbow of water in the air. You can also splash around underneath the fountain as the water droplets come falling down. This makes them fun for both children and adults to enjoy.

Pool Fountain Types

The circulation system is what powers most pool fountains. The two main types of pool fountains are floating fountains and poolside fountains.

Poolside Fountains

An adapter is attached to one of the return jets. Instead of the water getting pushed into the pool from the return jet, the water gets pushed into the fountain. For the adapter, a pipe gets attached to it. Then you attach a fountain nozzle to the pipe. That’s it!

Solar Floating Pool Lights

On Amazon.com
Floating Fountain

An adapter is attached to one of the return jets. This time, you’re not attaching a pipe to the adapter. Instead, you must attach a hose to it. Connect the hose to the fountain nozzle. Allow the fountain to float on the surface of the water. Floating fountains are weighted to stop them from floating away or slanting over.

A clear hose is included with certain pool fountain models. This allows the hose to blend with the pool and make it hard to notice.

Pool Waterfall Fountains Features

Lights

Pool fountains light up at nighttime because they have lights integrated into them. Sometimes they’re multicolored lights too, which create the perfect party setting if you have guests over in your pool.

Patterns

A lot of good pool fountains let you spray the water in more than one direction. They may even have different water pressure strengths, as well. Adjust the spray directions and strengths to your liking.

Conclusion

If you’ve gone through the trouble of keeping your pool clean, then you might as well spice up the aesthetics a little bit more. A pool fountain is entertaining, gorgeous, and helps with the circulation and clarity of your pool.

61qpKVs9MuL._AC_SL1050_

Bluetooth Speakers with Colorful Lights

Recommended Reading
0
91GbJuK5gcL._AC_SL1500_

Everyday Protection for your Family and Friends at the Touch of a Button! With an Automatic Pool Cover

Best Pool Cover You Can Buy in 2020

If you want to keep your swimming pool clean and sanitary, then a good pool cover is essential. A pool cover serves as a barrier between the water underneath and the debris outside. It’ll prevent animals, insects, children, and other unwanted guests from getting into your pool and having an accident.
 
The best type of pool cover is an automatic pool cover. Although it is priced higher than a manual pool cover, you won’t have to strain yourself when removing the cover and putting it back on. Of course, automatic pool covers have their advantages and disadvantages when compared to regular pool covers. Let’s explore them further so that you can better understand what these covers are all about.

Overview of Swimming Pool Covers

In some jurisdictions, a pool owner is legally required to have a fence installed around their swimming pool. An automatic pool cover is almost like a fence around your pool, except that it is a horizontal fence instead of a vertical fence. In addition, this is a fence which moves and can be controlled with a remote-control device.

Automatic pool covers work almost the same as flagpoles and cranes because they use cables and pulleys. They also use tracks, reels, and a motor to supply power for the automated movement of the cover.

Two straight tracks with cables (or ropes) running through them can be found across the edges of the swimming pool. They’re attached to two reels which support their movement.

As the cover is opened, it unwinds the smaller reel while winding the main cover reel. This is how the cover gets pulled back. As you go to put the cover back on the pool, this process all happens in reverse by winding the smaller reel and unwinding the main cover reel.

The motor is what automates the movement. When you push the proper button, the motor causes the reels to turn on their own. It is much easier than manually cranking it open, right?

Pool Cover Aesthetics

Automatic pool cover installations require someone who is knowledgeable and experienced. There are a lot of electronic elements involved, so this is not some DIY project that you can simply learn by doing. Plus, there are many ways to go about the installation. They depend on your budget, objective, and current pool setup. Therefore, don’t do the installation yourself unless you know what you’re doing.

There are plenty of experienced contractors you could hire to perform the installation. As they’re installing the tracks and reel system, you can request for these components to be concealed or to be left out in the open. Again, it depends on your budget and the visual appeal you’re going for with your swimming pool.

The Good and Bad

Modern society is becoming more automated each day. Everything is about making things easier and more convenient for people. Grocery stores now have self-checkout registers and videos are now purchased or rented over the internet through digital streaming.

But like anything else, automation has its ups and downs. The same applies to automated pool covers.

Sun2Solar Blue 16-Foot-by-32-Foot Rectangle Solar Cover

On Amazon.com
Advantages

It is fascinating to watch an automated pool cover open and close over your pool. But here are the real benefits of this:

Safer

Automatic pool covers are sturdy and much better at keeping out unwanted elements and people from your pool. They are also great at trapping heat and water in your pool too. Thanks to their heavy vinyl material, most accidents can be prevented. Plus, a reasonable amount of weight can be supported.

The American Society of Testing and Materials has set a safety standard which requires pool covers to support a minimum of 485 pounds of weight for every 5 square feet of pool space. This is the average weight of a child and two adults.

Use a pool cover pump and cover together to stop excessive water buildup in your pool and to increase safety for the people who use the pool.

Save Heat

The open-air absorbs most of the heat from the pool. But if you block the open air from the water with the pool cover, the heat stays trapped in the pool. Then you can enjoy more warmth when you’re finally ready to get into the water.

The cover also prevents pool water from evaporating, so you won’t need to add as much sanitizing chemicals to balance the water out.

Easier to Keep Water Clean

Automatic pool covers prevent debris and leaves from blowing into your pool water. That means you won’t need to do much skimming at all.

Keep Out Rain

Rain will naturally fall onto your pool water if there is no cover to block it. Automatic pool covers can prevent most unexpected downpours from adding rainwater to your pool. Rain, of course, contains a lot of pollutants, dust, dirt, and other small particles of debris that are collected while falling from the clouds.

If you live in a populated location, you can expect a lot of acid rain to fall down from the sky. This type of rain will increase the acidity level of your pool water. Because of this, you’ll need to spend too much money and time balancing out the water and removing the debris from it. Save yourself a lot of aggravation by purchasing an automatic pool cover instead.

Happybuy Pool Safety Cover

On Amazon.com
Disadvantages

So, what could the disadvantages of an automatic pool cover possibly be?

Expensive

A lot of automatic pool covers are on the pricey side. You can expect to pay anywhere from $5,000 to $15,000 for the cover and installation costs. The typical automatic cover lasts between 2 to 5 years. That means you’ll have long-term maintenance expenses in terms of replacing and fixing components of the cover when they go bad. This adds between $2,000 and $4,000 more in expenses.

Not Winter Friendly

Automatic pool covers are not too friendly to snow and ice. These natural elements add a lot of weight to the cover, which they can’t always support. To combat this issue, you’d have to keep your automatic cover open throughout the winter and simply apply a standard security cover over your pool water.

Make the Right Choice for an Inground Pool Covers

Your budget and preferences will determine which automatic pool cover you select. Most automatic pool covers have the same aesthetics and function in the same way. Just go with the most affordable option from a reputable supplier, and you should be okay. If you can push a button to open and close your pool cover, then it is all that matters. This will give you a lot of convenience by reducing your maintenance costs and efforts considerably.

Blue Wave Bronze 8-Year 20-ft x 40-ft Rectangular

On Amazon.com
0
IMG_6863

Easy Removal Debris from Your Pool Surface With a Pool Skimmer Basket

Best Pool Skimmer Basket You Can Buy in 2020

Skimmer baskets are important accessories to have for pools. The pool basket is positioned within the skimmer as it lies in the pool. Any toys, debris, bugs, or other big contaminants in the water will get picked up by the basket. If there is no basket, then all this debris might hurt your pool pump or filter.

The shape of the basket is either going to be square or round. It depends on how the brand made it. Also, you need to consider the type of skimmer you already have too. Usually, you need a skimmer basket which is the same brand and model as the skimmer. This ensures that the basket will fit inside the skimmer without any problems.

It can be difficult to obtain a great pool basket. With so many brands and models to choose from, it can get confusing to pick the best one for your needs. Fortunately, we’ve researched the best baskets on the market right now and provided reviews of them below. Hopefully, these reviews will set you on the right path toward picking a good skimmer basket.

About Pool Skimmer Baskets

A skimmer pool basket looks just like any basket. Its job is to trap big pieces of debris so that they don’t enter the pool pump and pool filter. If debris were to enter these components, they would get clogged up. Then the pool water would not circulate very well.

Features of a Inground Pool Skimmer Basket

When shopping for a skimmer basket, you should pay attention to their main features. These are what separate them from one another.

Price

The price of skimmer baskets should fit most people’s budgets. Some skimmer pool baskets cost more than others, based on their quality. You could always purchase an expensive skimmer basket to get the best quality one, but it may not agree with your budget. Sometimes you may find a manufacturer who makes a good skimmer basket and still prices them cheap. Just do your research carefully.

Longevity

Skimmer baskets are not all the same. Some are made from better material than others. The best way to determine the durability of a particular skimmer basket is to look at its customer reviews and see if most people are happy with it or not.

If you see a lot of complaints about the skimmer pool basket breaking or damaging easily, then move on to a different model.

Installation Level of Difficulty

If you’re new to using skimmer baskets, then find one that is easy and simple to install. But if you go with a more complex pool basket, you can always hire a professional installer to handle the hard work for you.

UV Resistance

If your skimmer basket is made from cheap materials, then the UV rays of the sun could cause the pool basket to eventually crack. Therefore, find a basket made of a material that is UV resistant. That way, you won’t need to worry about the UV rays damaging the basket and limiting its lifespan.

Warranty

Always buy a skimmer basket that comes with a warranty. Even if you think a particular brand is of good quality, you can never be too sure. Just to be safe, purchase a skimmer basket with a warranty. Then you can always return the pool basket if it malfunctions prematurely.

Fit to the Skimmer

Your skimmer basket needs to fit inside the skimmer easily. Otherwise, it will not be able to trap debris properly. Your skimmer may even get damaged too. In some cases, the pump and filter may get damaged as well.

Best Skimmer Baskets

Below are reviews of the 8 most recommended swimming pool skimmer baskets.

Top Rated: The Best Choice for Pool Skimmer Basket

1st
Our Score: 9.8/10

1. GVT SP-HP Skimmer Basket, White

Learn More >>

2nd
Our Score: 9.2/10

2. Custom Molded Products CMP Vented Handle FlowSkim Skimmer Basket

Learn More >>

3rd
Our Score: 9.2/10

3. Hayward SPX1070E Basket Replacement for Hayward Automatic Skimmers

Learn More >>

The Importance of Cleaning the Skimmer Basket and Skimmer

Why should I clean the basket and skimmer?

This should be part of your pool maintenance routine. You can’t have a clogged basket because it stresses out your pool pump. If it gets too bad, your water won’t circulate properly. This will be bad for your water and cause the seal of your pump to be damaged.

The turnover rate of your pool must remain consistent if you want the filtration system to be effective. A full basket and skimmer cause the pump to pull very little water in. But if you clean the pool basket and skimmer, more water can get pulled in and then filtered.

What is the Best Way to Clean Them?

Once per week, you should clean the basket and skimmer by following these instructions. To clean the pool basket, you should:

  • Turn off the pump and heater of the pool. Before the pump is turned off, let the heater cool off for 10 minutes if it was previously on.
  • Shut down the skimmer and main drain valves.
  • If you have an underwater pool pump, turn the filter valve to the “Closed” position.
  • Take off the lid of the pump.
  • Clean the basket with the garden hose. Since the skimmer basket may break after a while, let the materials dry to make cleaning easier. To do this effectively, have a couple of different pump baskets available and then rotate their use. This makes cleaning so much easier.
  • The basket can now be reinstalled. If you must twist to secure it in place, try not to overtighten it.
  • Pump lid and o-ring inspections should be made. Look for cracks or damage to them. Lubricate the o-ring with some oil if you find it to be dry.
  • Install the lid and o-ring. Don’t overtighten.
  • Make sure the filter valve of your pool is positioned properly.
  • The main drain valve can be opened now.
  • The filter’s pressure relief valve can be opened too.
  • Turn on the pump.
  • After the prime is caught by the pump, the other skimmer valves can be opened.
  • When a consistent pool water stream flows into the relief valve, you can close the valve.
  • Turn on the heater and cleaner pump.
To clean the skimmer basket, you should:
  • Turn off the pool pump.
  • Remove the lid from the skimmer.
  • Take off the skimmer basket and remove the trash.
  • Put the basket back inside the skimmer.
  • Put the lid on and turn the system on.
Conclusion

You can find skimmer baskets of several different designs and sizes. But the one thing they have in common is they gather big pieces of debris, such as toys, leaves, and bugs. If you purchase a high-quality skimmer pool basket, it should have a long life.

0
710MGz4oygL._AC_SL1200_

Childproof Your Swimming Pool with a Pool Fence Protect your Family & Friends

Best Pool Fence You Can Buy in 2020

There are so many swimming pool fences for sale on the market. You’re probably wondering how to pick the best one for your pool. The purpose of a pool fence is to eliminate the open space between your pool and home. It gives your pool area more privacy and security too.

It is really a lot easier to choose a pool fence than you may think. You just need to learn about the different types of fences and the various styles and features they have to offer.

Pool Gate Fence Types

You might think that all pool fences are the same, but they’re not. Here are some of the main types of pool fences on the market:

Wooden

If you want your pool to be surrounded with a natural looking design, then you’ll want to build a wooden fence around it. Just be prepared to replace the fence after a couple of years because they don’t have a long lifespan.

Mesh

 If you have small children in your home, then a mesh fence is the best fence to surround your pool with. A mesh fence is a durable fence which helps prevent children from gaining unsupervised entry to your pool area. They won’t be able to crawl under it or climb over it.

Steel

Steel pool fences provide the best privacy of all the fences. But you need to keep up the maintenance regularly because the steel can rust fast.

Glass

Glass pool fences certainly won’t give you privacy. They’re also easy to break and shatter, which would likely cause glass pieces to fall into the pool water. This makes swimming quite dangerous under these conditions. It even costs a lot to purchase a glass fence.

The Most Common Pool Fencing Styles

Some states have strict requirements regarding the pool fence styles that are acceptable to have. Here are the most common styles:

Flat Top

The average pool fence has a flat top. This is where vertical bars and horizontal bars are adjoined on the top and bottom.

Double Top

These are just like flat top fences. The only difference is there’s an extra horizontal bar on top. With 2 bars, ornamental items are usually placed there.

Loop Top

 Instead of 2 individual bars on top of the fence, the loop top fence has one long metal bar that is curved.

Wire

Thick wire bars made of metal are used for the wire pool fence. There are no hollow tube bars made of metal like the other fences listed above. With thick wire bars, you get more durability and weather resistance from your fence.

Features of Pool Safety Fences

Below are some helpful features to look for in the pool fence that you purchase.

Gates That Close and Latch by Themselves

Look for a gate which closes and latches automatically after you leave. Magnetic power is usually used to make this happen. This type of gate ensures that you never forget to close your gate because it does it for you. Then you can have peace of mind knowing that your kids won’t get into the pool area alone.

Durable Mesh

The mesh is everything when it comes to a pool fence. If you have a low-quality mesh, then it is easy for a child to force their way through the fence and gain access to the pool area. Look for the words “tension-based support” when shopping for pool fences.

Any pool fence is susceptible to wear and tear. But there are fences which are better at resisting tears and punctures. A good mesh can return a tear to its regular shape again. The best mesh coatings to look for are polyester and vinyl. These mesh coatings are easy to clean and resistant to mildew.

Height

Everyone wants a high pool fence because it provides more privacy and security. At a minimum, your fence should be 4 feet tall. This is good enough to keep out most children. If you can find a taller fence, then that is better because it means you won’t have to purchase a new fence when your child grows taller.

Poles

The poles of your pool fence need to be good quality. If you can find triple-reinforced poles which pass safety standards, then that is good. Aluminum poles are the best for any pool fence because they give it the tension and strength needed to keep it secure. And remember, it is better to have a shorter distance between the two poles.

Borders

A vinyl border on every corner of your pool fence will increase safety. Not only will your fence receive a cool finish, but it stops the mesh from unraveling.

Insert visible reinforced material into the vinyl to make your pool fence extra strong. This will also reduce the chances of sagging too. Borders are the best for making a durable and strong fence.

Best Pool Fence

Below is a list of the 7 best pool fences available right now.

Top Rated: The Best Choice for Pool Fence sand Gates

1st
Our Score: 9.8/10

1. Pool Fence DIY by Life Saver Fencing Section Kit, 4 x 12-Feet, Black

Learn More >>

On Amazon.com
Why we chose it

The Life Saver Fencing Section Kit is a do-it-yourself pool fence solution. It features one 12’x4’ fence with 5 aluminum post reinforcements. A safety latch and deck sleeves are included too. This is the perfect solution for shielding your children from the pool area when you’re not around.

The gate must be purchased separately, though. But if you don’t want to purchase the gate, you can still get a lot of security out of the fence alone.

2nd
Our Score: 9.2/10

2. Giantex Inground Swimming Pool Fence

Learn More >>

On Amazon.com
Why we chose it

The Giantex Inground Swimming Pool Fence is durable and strong. Its dimensions are 12’x4’ and its material is aluminum. The product can be assembled easily and used around an inground pool area. If you need to block kids and pets from accessing your pool area, then this is the fence to purchase. Based on your pool area size, the fence can be shortened to better fit around it.

If you need to uninstall and then later reinstall the pool fence, you can do so easily without risking any damage to it. For the installation, there is a detailed instruction guide which comes with the fence. All the required tools and hardware to perform the installation are included too.

3rd
Our Score: 9.2/10

3. WaterWarden WWF200 4 Foot Pool Fence

Learn More >>

On Amazon.com
Why we chose it

The Water Warden Pool Safety Fence might not give you privacy at just 4 feet tall, but it can make it safer around your pool area. Kids likely won’t be able to get past a fence that is 4 feet in height. There is no gate included, though.

Other items that come with the fence include a measuring template, installation video, tools & hardware, and installation instructions. If you’re someone who is a do-it-yourself type, then you will find this fence easy to install. Virtually any modern safety gate should be compatible with this fence.

If you want a taller version of this fence, you can choose the 5-foot tall version or a kit which extends the height to 12 feet. The fence lasts a long time and it provides amazing value for the investment.

Our Choice

The Life Saver Fencing Section Kit is our top choice. This is the best way to prevent your children from gaining entry to your pool area when they’re not supervised. It is easy to install by yourself and comes with 5 aluminum posts.

Swimming Pool Fence Installation Guide

The installation instructions which come with the pool fence should be followed. But, in general, here is how to install most pool fences.

1) Measure the Length

Use a garden hose or a simple length of rope and place it 3 feet away from the edge of your pool. The rope or hose will draw the outline of where the fence will be installed. Leave room for the gate by using chalk to mark it.

Take measurements of the length of the hose or rope. Now purchase a fence which has the same length and all the other features you need.

2) Measure the Distance

Find a stick that is 4 feet long. Cut a piece off that is 3 feet in length. You will use this to measure the area between the sections of the pool fence. With the piece still left, cut a piece out of it that is 2.5 inches in length. Use this to measure the area in between each panel.

3) Mark Holes for Drilling

You need a waterproof marker to mark your drill hole areas. Find the right spacing by using your 3-foot and 2.5-inch sticks. Do this all around the perimeter of your pool.

4) Get Your Drilling Machine Ready

The cement bit must be included in your drilling machine to successfully drill holes in the designated areas on the deck. The plastic sleeve sizes need to be measured. Now measure a piece of tape, cut the piece, and then tie it to the drill bit. Do this at the point where the bit and sleeve hit. That way, your holes won’t be drilled too deep.

5) Start Drilling into the Marks

Put on your protective gear and start drilling holes. Put sleeves in the holes to secure the poles in them.

6) Perform the Pool Fence & Gate Installation

Begin at the gate area and then install the fence around the pool. The gate area should be open for the gate installation. The spring latch is inserted first, followed by the gate.

Conclusion

Pick a pool fence which accommodates your needs. Just make sure the fence satisfies local legal regulations and insurance requirements. Most importantly, make sure it adds safety and protection to your pool area.

0
91WI6J9hZEL._AC_SL1500_

Find the Top Cover Pumps there Essential for Pool Closing if you Own an Inground Pool or an Above Ground Pool

Best Pool Cover Pump You Can Buy in 2020

1st
Our Score: 9.8/10
Wayne WAPC250
2nd
Our Score: 9.2/10
The Little Giant Pool Cover Pump
3rd
Our Score: 8.9/10
Ocean Blue Winter Pool Cover Pump
4th
Our Score: 7.2/10
Little Giant Manual Pool Cover Pump

When the summer season is over, it’s time to close down your pool and prepare for the winter season. However, this doesn’t mean you just throw a cover over your pool and leave it alone until springtime. Your pool must be maintained regularly no matter what season it is. This means maintaining the winter cover and keeping the pool water clean and at the appropriate level. The cover takes a lot of abuse from the nasty weather of the winter, so you must ensure it stays clean and firm. If the cover takes too much abuse, then it could cause rain and snow to get through and raise the water level.

There is a straightforward piece of equipment which can solve all your pool maintenance problems during the winter. It will both protect your cover from damage and prevent water from building up in the pool. This equipment is called a pool cover pump. Let’s examine its features so you can understand why it works great for maintaining pools.

The Benefits of a Swimming Pool Cover Pumps

A winter pool cover prevents weather debris like leaves, snow, twigs, and rain from getting into the pool water. The only problem is this debris stays on top of the pool cover. There is no automated system that removes the debris.

The more debris and water that accumulates on top of the cover, the more weight that accumulates in the center. For every 1 inch of rain per square foot of space, you have 5.2 pounds of weight on there. Imagine a pool cover with 280 square feet of surface space, which is what a 12’ x 24’ swimming pool normally requires. This would cause 1 inch of rain to put approximately 1,456 pounds of weight on your cover from the rainwater. With this much weight pushing on the center of your cover, you’ll need a replacement cover very soon. Plus, the cover cannot prevent the water and melted snow from seeping through slowly.

Before you can take off the cover and open your pool, you need to remove the water which stands on top of it. If you think you can handle the job, then remove the water yourself. Otherwise, hire a professional to do it for you. This is necessary if hundreds of pounds of water pressure have built up on your pool cover for a couple of months.

If you’re not sure where to start, check out our refrigerator buying guide below. We’ll walk you through each type of refrigerator — and why you might or might not want a french door or a top freezer — then help you figure out the right questions to ask in your search.

Should You Get a Manual or Automatic Pool Cover Pump?

There are automatic and manual pool cover pumps. Which one is better?

A manual pump may sound primitive, but it is actually quite simple to use. You won’t need to pump or twist a lever to remove the debris and water from your cover. What the “manual” pump does is it pumps out these elements from your cover after you manually activate the pump. So, if you see debris accumulating on top of your cover, then you simply turn on the pump. That is it.

Of course, the problem with manual pump comes from human error. If you don’t monitor the severity of the debris on your cover, then it could cause problems for it if you’re not around to turn on the pump.

This is what makes the automatic pool cover pump so much better. You just place it in the center of your winter pool cover and leave it there. When rain falls onto the cover, the pump activates automatically to pump out the water after it reaches a certain level. You should periodically check on the cover anyway, but this will at least prevent a lot of problems from happening.

Please note that a pool cover pump cannot eliminate snow from your cover. You must wait until the snow melts first. Once it becomes liquid water, the pump can successfully remove it from the cover. But you need to be careful here because sometimes ice can form instead of water. This will make the situation worse. Just to be safe, remove the snow when it’s on your cover using a snow removal tool. Make sure its head is made of non-abrasive foam. That way, the pool cover won’t get damaged or torn as you push off the snow from the cover.

Best Pool Cover Pump

Automatic pool cover pumps are the best, but they also cost more. If you’re not afraid to invest the money, then go with this pump every time. But if you’re looking to save money and don’t mind manually having to activate the pump, then go with the manual pool cover pump.

Top Rated: The Best Choice for Pool Cover Pumps

1st
Our Score: 9.8/10

1. Wayne WAPC250

Learn More >>

On Amazon.com
Why we chose it

The automatic pool cover pump called the “Wayne WAPC250” is the best pump around. Once the water comes up to a certain level on the machine, the pump activates automatically. There is also a filter attached to prevent debris from knocking over or clogging the pool cover pump. This gives you the freedom to walk away without having to monitor it.

The Wayne WAPC250 has the ability to pump as much as 3,000 gallons of water per hour. It only has a 1.25” drain hose and a 25’ power cord too. If the temperature outside is freezing, the motor of the pump will be automatically protected by the freeze protection technology included. When you place the pump on the cover, you can position it properly with the 25’ rope that comes with it.

2nd
Our Score: 9.2/10

2. The Little Giant Pool Cover Pump

Learn More >>

On Amazon.com
Why we chose it

This Little Giant automatic pool cover pump may not be as powerful as the Wayne WAPC250, but it can still pump out as much as 1,745 gallons per hour. Since the pump is automatic and submersible, it will activate automatically if the water level on the cover is 2 inches high around the perimeter of the pump. When the water level goes under 2 inches, the pump automatically shuts off.

You can attach a regular garden hose to the Little Giant pool cover pump. You can clean and maintain the pump easily because it features an intake screen that is removable. The machine only weighs about 13 pounds. This certainly won’t stress out the pool cover too much.

3rd
Our Score: 9.2/10

3. Ocean Blue Winter Pool Cover Pump

Learn More >>

On Amazon.com
Why we chose it

This is an affordable automatic pool cover pump which doesn’t require much work to operate. It is completely submersible and pumps out water when it gets up to 1/8” high. Included in the kit are a garden hose adapter and a 25’ power cord. These are the same accessories you’ll find included with the Wayne and Little Giant pool cover pumps.

The Ocean Blue can pump around 250 gallons of water per hour because it has a small motor. It is automated though, so you don’t have to monitor it while it’s pumping.

4rd
Our Score: 9.2/10

4. Little Giant Manual Pool Cover Pump

Learn More >>

On Amazon.com
Why we chose it

The Little Giant gives you some additional control when it comes to removing water. It is also a durable and affordable pump too. Once you connect the 0.75” garden hose, you just plug in the pump. It will then start removing the water when it is high enough. Your hose won’t be clogged with debris because of the intake screen that comes with the Little Giant.

It can pump 550 gallons of water per hour. If there is standing water, it may take some time to remove it. Try to maintain the pump and cover regularly to make the removal process go faster. You can submerge the motor completely if you want to.

5th
Our Score: 9.2/10

5. Fibropool Pool Cover Pump Electric Manual

Learn More >>

On Amazon.com
Why we chose it

The Fibropool cover pump weighs only 3.6 pounds and is very inexpensive. It can pump around 600 gallons of water per hour. Best of all, it comes with a 16’ drain hose of its own. You don’t need to use your own garden hose for the pump.

This 16’ power cord is not long, so you need to position the pump close to a power outlet. Having a narrow pool helps too.

Drain Your Swimming Pool Cover Troubles Away

It doesn’t matter if you choose an automatic or manual pool cover pump. Any pump is better than no pump as far as maintenance is concerned. It gives you peace of mind knowing that the terrible winter months won’t destroy our cover or pool. But no matter which season it is, you won’t need to do as much cleaning when this pump is actively being used.

0
pool pumps options

Find the Best Pump for your Pool with Single Speed, Variable Speed, and Above Ground Pool Pumps.

Best Pool Pump You Can Buy in 2020

Best Overall Pool Pump

Our Score: 9.8/10
Pentair 011018 IntelliFlow Pool Pump

Best Hayward Pool Pump

Our Score: 9.2/10
S.R. Smith 670-209-58123 Typhoon Right Curve Slide

Best Conventional Pump

Our Score: 8.9/10
Pentair 340093 / 340039 SuperFlo Pump

Best Above Ground Pump

Our Score: 7.2/10
Hayward SP1593 PowerFlo Matrix 1.5 HP

Do you need a new pool pump? You’ll know when your current one is going bad because it will make these loud and annoying sounds. These are sounds that’ll probably wake you up in the morning too. The only way those noises will go away is if you turn off the pump. However, it isn’t good for your pool water to leave the pump off for a long time. So, the only way to remedy the situation is to replace the pump with a new one.

When you go shopping for a new pool pump, you must select one that accommodates your budget and the type of pool that you have. This should be considered a long-term investment because you’ll be using this pump for a long time. That is why you need to understand the needs of your pool and the best pump features which will satisfy those needs. After you purchase the pump, try educating yourself on the various problems that may arise.

The Function of a Pool Pump

The pump is the main component of the plumbing system of your pool. If you don’t have a good pump, then the water in your pool will not circulate well. If the water doesn’t circulate well, then it won’t reach the filtration system and get a thorough cleaning. If the water is not cleaned, then it is left dirty, foggy, and loaded with bacteria and other nasty contaminants. This is not the kind of water that you should ever swim in.

Basic Features of Pool Pumps

Pool pumps have certainly evolved over the years. There used to be 1 type of pool pump only; not there are 3 types. They are as follows:

1) Single-Speed Pumps

The single speed pump is the original type of pool pump. It is called “single speed” because the impeller spins at only one speed. The motor’s horsepower determines this speed.

If you already have a single-speed pump and you need to replace it with a new pump, then this is the perfect time to upgrade to a dual-speed pump. Then you can have more efficient circulation and filtration in your pool.

Be aware that if you still decide to use a single-speed pump, it may be illegal in the state that you’re in. California and Arizona are just two states which have outlawed the use of single-speed pumps for pools. Research the laws of your state to see if single-speed is acceptable there.

2) Dual-Speed Pumps

Dual-speed pumps can be set to high or low speed. If you set it to high speed, it acts like a single-speed pump. If you set it to low speed, the water turnover in your pool won’t be as efficient. However, it will consume a lot less energy too. The volume of your pool will determine which speed is right for you.

3) Variable-Speed Pumps

Variable-speed pumps are the most expensive pool pumps, but they’re also the best. These pumps don’t use an induction motor. They use a permanent magnet motor, which is what you’d find in an electric car. There is less friction generated from a magnet motor too. This is what makes them more efficient.

You won’t consume as much power from a variable-speed pump either. Meanwhile, water turnover will be fast and efficient. And if you’re worried about loud noises, the variable-speed pump has fewer RPM than a dual-speed or single-speed pump. This means it is the quietest pump you could buy. Some utility companies may even give you a rebate for using this pump too.

Features of a Swimming Pool Pump

At this point, you may have some idea on which type of pool pump you’re going to get. Don’t run out and buy it just yet, though. You still need to think about the features of the pool pump first.

For instance, the horsepower of the pool pump is very important. If it has a lot of horsepower, then it will do a better job of turning over the water. That way, you don’t need to run the pump as often or for very long.

Of course, you need to consider the size of your pool, the pipes of your filtration system, and the filter size itself. If your filter is small, then having too much horsepower in your pump would be overwhelming for it. If you have 3-inch pipes, then a 3-horsepower pump would be good. But again, if your pool is small, then you’ll be paying more money on electricity with this setup. It is important that your pump isn’t too much for the filtration system to tolerate. At the same time, the horsepower should be powerful enough to turn over the volume of water in your pool at a consistent rate.

Another feature to consider is the voltage amount of the pump motor. Some pool pumps need 220 volts while others can use the standard 110 volts. If you have an above-ground pool, then it probably needs a pump that is only 110 volts. But if you have an above-ground pool, it likely needs 220 volts if it is big enough.

Some pool pumps must be plugged into an electrical outlet while others need to be hardwired. If you need it hardwired, this will require you to hire an electrician to integrate the pump into your electrical system.

Selecting the Best Inground Pool Pump Size

If you want your pool water to stay clear, it must all pass through your filtration system at least one time every day. The turnover rate refers to how much water is filtered. The entire volume of water in your pool must get pumped into the filtration system throughout the course of one day.

To determine the turnover rate of your pump, you must know the volume of your pool. A pool calculator can help you figure this out. Just search for one on Google.

After you’ve calculated the volume of the pool, divide the volume amount by 8. This will give you the number of GPH (gallons per hour) of water that gets pumped into your filtration system.

A lot of pool pumps nowadays use gallons per minute (GPM) instead of gallons per hour. To figure out the GPM, you just take the GPH and divide it by 60. Once you have the answer, this is the total GPM which must get pumped into the filter for a complete turnover of the pool’s volume.

Here are the formulas:

Volume / 8 = GPH

GPH / 60 = GPM

After you’ve performed these calculations, choose a pump size which is suitable for the GPM that your pool needs. If done correctly, the water turnover should be able to finish in 8 hours. It is okay to select a pump that has a slightly higher GPM than needed. But don’t choose one that has a lower GPM.

Pool Pump Troubleshooting

Pool pumps do not run well forever. There will come a point when a problem arises with your pump. If you learn about the most typical problems that a pool pump could face, you will be better prepared to deal with them whenever they present themselves.

Leaks

The number one problem that occurs is pool pump leakage. This can happen if you have a damaged or worn impeller O-ring, shaft seal or thread sealant. The discharge pipe may also have shrunken threads which are causing this problem too.

In many situations, you can buy these parts at cheap prices and install them yourself if you need to replace your existing ones. This will save you money from having to hire a professional. Just find out where the leak is coming from, disassemble the system, replace the necessary part, and reassemble. Then your pump will work well again.

No Water is Being Pulled

If the pump isn’t pulling water into it, then the water won’t flow through the filter and get cleaned. Check to see if your system is clogged. This may be the reason why you’re having this problem.

Start by investigating both the pump baskets and the skimmer. If they’re not clogged, inspect the impeller and see if there is debris caught in it. If there is, then remove the debris so that the blade can be free to move fast again. Now check the pump by opening it up and remove any debris inside it as well.

If this still doesn’t fix the problem, then your suction line may have an air leak in it. Since air doesn’t have as much mass as water, then air gets sucked into the pump rather than the water. If there are leaks in any of the lines, patch them up.

Failure to Start the Motor

If the motor doesn’t start, check to see if the breaker has been tripped or not. If the pump doesn’t turn on when the breaker is on, then you’re having some kind of electrical issue. The only thing to do in this case is to replace the motor.

You may want to call a professional electrician to deal with the electrical system. This will ensure your safety.

Motor Shuts Off Extemporaneously

When the motor shuts off on its own, then it may be overheated. Inspect the air vents of the pump to see if they’re being blocked by anything. Try placing something over the pump to shade it from these obstructive outer elements.

If this still doesn’t fix the problem, you should call an electrician because there is probably an electrical problem there.

Noisy Motor

You can always expect some noise to come from your pump motor. But if you start hearing a lot of strange noises that you don’t normally hear, then it probably means there is a problem.

Sometimes it may just be a vibration issue. If that’s the case, put a rubber pad under the pump. But if you hear growling noises after doing that, then your pump isn’t sucking up enough water. Instead, it is sucking in air.

To address this problem, try to prime the pump. If the noise continues, inspect the intake lines to ensure they’re not leaking or clogged. If they are, then fix the leak or remove the debris that is clogging the lines. After that, the noises should go away.

If you hear a screaming sound coming from the pump, then the bearings are probably no good. Replace the bearings to fix this issue.

Replacement parts are very cheap. Just be prepared to spend a lot of time on the labor because you need to turn off the motor, detach it from the pool, and then take it apart. You need the right tools for the job, so make sure you have those.

Calling a Professional

If you’re comfortable repairing the pump yourself by disassembling the motor and configuring the electrical system, then go for it. You’ll certainly save a lot of money if you do the job yourself.

However, you need to have the necessary skills to do this job. This isn’t something where you can get “on-the-job” self-training. If you’re not experienced at these kinds of tasks, then hire a professional to do it for you.

The plumbing of your pool depends on a functional pool pump. If you don’t have the confidence to fix it, then you might end up making it worse. Have peace of mind by hiring a professional to repair it instead.

If you want to learn, perhaps you can watch the professional as they work on the pump. Take notes on what they’re doing so you can do the same thing yourself next time.

Best Pool Pumps

With the knowledge you have about pool pumps, you can decide for yourself which is the best pump for your particular swimming pool.

Top Rated: The Best Choice for Pool Pump

1st
Our Score: 9.8/10

1. Pentair 011018 IntelliFlow Pool Pump

Learn More >>

On Amazon.com
Why we chose it

The Pentair 011018 is another energy efficient pool pump. It is 90% more efficient than competing pool pumps. It is also very quiet when it is on too. So, if you’re someone who hates loud noises coming from a pump, then the Pentair 011018 is right for you. There are 8 programmable settings along with a timer. This gives you power over the operation and timing of your pump. The Pentair 011018 is simple to install and easy to maintain. Meanwhile, it will save you money.

2nd
Our Score: 9.2/10

2. Hayward W3SP2303VSP MaxFlo VS Variable Speed Pool Pump

Learn More >>

On Amazon.com
Why we chose it

The Hayward SP3400VSP is great if you’re looking for energy efficiency in your pool pump. Watch as your energy costs are reduced after you upgrade to this wonderful pump. It comes with a huge strainer basket which is compatible with many different types of pools. After you install the pump, just activate “stand-alone mode,” and it will work with the filtration system to actively pump and clean the water.

3rd
Our Score: 9.2/10

3. Pentair 340093 / 340039 SuperFlo Pump

Learn More >>

On Amazon.com
Why we chose it

The Pentair 340093 is a pump that primes itself. It is both easy to install and startup. It is also energy efficient and powerful too. To ensure quiet operation, it has a custom hydraulic system and thick walls for its body. There is a large basket included which is easy to access and maintain. The pump is strong enough to move a lot of water into the filter while remaining energy efficient.

Best Pump for Above Ground Pools

A lot of pool pumps can be used in either above ground or inground pools. But to ensure you have a good quality pump, try to find out which is made for your specific type of pool.

4nd
Our Score: 9.2/10

4. Hayward SP2610X15 Super Pump

Learn More >>

On Amazon.com
Why we chose it

The Hayward SP2160X15 is known for being a highly reliable pool pump. In addition, it is energy efficient and very quiet when it runs. You can even remove the transparent basket without needing any tools. This makes maintenance quite simple. All you need to install the pump are the 4 bolts that come with it. Once it’s installed, maintenance will be easy, and the pump will be quite reliable.

Top Rated: The Best Choice for Above Ground Pools

1st
Our Score: 9.8/10

Hayward SP1593 Power-Flo Above Ground Pool Pump

Learn More >>

On Amazon.com
Why we chose it

This above ground pool pump contains a huge strainer basket which simplifies the process of removing debris from it. You can make the pump either horizontal or vertical to accommodate any space of your pool. An internal drain plug is even included with the pump to simplify the winterizing process.

The Top Intex Swimming Pool Pumps

Intex pools should use Intex pumps. Some above ground pools are compatible with Intex pumps too.

Top Rated: The Best Choice for Intex Above Ground Pools

1st
Our Score: 9.8/10

Intex Krystal Clear 3000GPH Pump

Learn More >>

On Amazon.com
Why we chose it

This combination of a filter and pump is made for Intex swimming pool use. But you can adapt them to other types of above ground pools too. You can move 3,000 gallons per hour with this pump. This is great if you have a bigger Intex pool which is at least 16 feet or more. There is also a timer built in which determines when the pump runs.

Conclusion

It is not hard to keep the circulation in your pool going consistently. Just pick a pump which accommodates your pool volume, filter, and size. Maintain and repair the pump when needed. If you do all these things, your pump should have a long life.

Anytime you need a new pump, don’t be afraid to invest in the best pump possible. It will save you money on energy in the long run.

0
51ZPHX9S2TL._AC_

Find the Best Timer, Devices, and Mechanisms for your Pool Pump System

Best Pool Timers You Can Buy in 2020

The filtration system and pump of your swimming pool consume a lot of electricity, especially if you leave them running all day. Your power bill will be quite high at the end of the month if this happens.

So, what’s the solution? Turn them off? Well, you can’t really do that because you need them both running to sustain the water circulation in your pool. But they don’t need to be running 24/7, so you can manually turn them off and on at the appropriate times to save on electricity.

However, what if you’re not home to turn them off and on? In that case, you need an automatic pool timer which runs for a scheduled period of time. It’ll automatically clean your pool at the scheduled times you set, so you don’t need to be home to turn it on. When the scheduled time has concluded, the filter will shut off. Then you will save money on electricity by not having your filtration system running unnecessarily.

Overview of Pool Pump Timer

An automatic pool timer can automatically activate and deactivate your pool’s filtration system to save you money on your power bill. Your pool water will still get filtered, but not all the time. Either that or the filtration system will change speeds over the course of a day.

Of course, it is important to keep your pump running for an adequate amount of time. Several pool owners make the mistake of not leaving their pump running for too long. To ensure your pool water is clean and circulated completely, keep the filtration system running for a minimum of 8 hours per day.

This should be long enough for all the pool water to get filtered one time or more. Then your swimmers can stay safe and healthy in the water.

Operating a Swimming Pool Timer

Most pool filtration systems have a plug which connects into a wall outlet or some other power source. When you introduce an automatic pool timer into the mix, the filtration system plugs into the timer, and the timer plugs into the wall outlet.

When you set the timer to deactivate the filtration system at a certain time, the link between the power source and the filtration system will get interrupted by the timer. The power is basically cut off from the filtration system when the set time is reached. Then, once the set time has expired, the connection is reestablished, which causes power to be delivered back to the system.

Automatic pool timer models are mostly mechanical. They’ll likely appear like a huge box with a clock built into it and an extension cord coming out of it. The latest models are smaller in size and include Bluetooth compatibility to accommodate people who want to manage the timer with their smartphone or tablet.

Intermatic T101R 120-Volt SPST 24 Hour Mechanical Time

On Amazon.com

Why 24/7 Filtering is a Bad Idea

Some people think it is a better idea to keep their pool water filtered for 24 hours per day, seven days per week. That would certainly clean the water of a lot more particles and debris, right? Not always, but possibly.

However, what about the expense of keeping the electricity on for all that time? The typical residential swimming pool owner will consume 3,502 kWh (kilowatts per hour) per year to run their pump. In comparison, the average Energy Star refrigerator will only consume around 561 kWh annually.

Therefore, if you keep your pool pump running 24 hours per day, seven days per week, then your power consumption per year will be the equivalent of running six refrigerators all the time. But if you’re using a high-powered pool pump, then you could consume as much as 4,300 kWh per year.

From a financial standpoint, a traditional pool pump will cost you an additional $450 per year on your electric bill. There are also cheaper “variable-speed” pumps that will only add around $100 or $200 per year to your bill.

These amounts might not seem like much because they’re based annually. But let’s say you run a traditional pool pump every day for the next ten years. That could mean an additional $4,500 gets added to your electric bill over the course of that time.

Filtration systems wear down as they get older, regardless of how much maintenance and care you give them. The motor simply won’t last forever. Eventually, the energy efficiency of your filtration system will diminish, and you’ll end up spending more money on your power bill to run it. If your pump is over seven years old or makes consistent sounds, then you shouldn’t run it all the time. It will only run for 8 hours per day, which will extend its longevity and reduce your energy costs.

Can’t I Just Use My Phone’s Alarm App Instead?

Everyone wants to save money by doing various tasks themselves. But do you really want the responsibility of always having to turn on and off your pool pump and filter? If you are not consistently doing this on time every day, it’ll mess up the water chemistry balance of your pool.

Therefore, don’t take the cheap way out. Use an automatic pool timer to make this process easier.

Best Pool Timers

There are so many reasons to purchase an automatic pool timer. It saves on energy costs, reduces the negative impact on the environment, and preserves the lifespan of your filtration system.

To help you decide which pool timer to choose, below are the nine best ones on the market today.

1) Intermatic 24-Hour Mechanical Time Switch w/ Outdoor Case

The Intermatic 24-Hour Mechanical Time Switch can manage as many as twelve appliances within a one-day timeframe. Some of these appliances include your pool pump, outdoor lighting, and other extras that you might use in your backyard.

Comes in a protective case that is wall mountable.

GE Heavy-Duty Mechanical Box Timer Switch

On Amazon.com

2) Woods Outdoor 7-Day Heavy Duty Digital Plug-in Timer

The Woods Outdoor Heavy-Duty Timer is an affordable timer which you can program for up to 7 days in advance. Set a unique time for each day or keep the timing separated amongst the weekdays and weekends. There is an easy-to-use digital display which lets you manage when the pool filtration system activates and deactivates.

If there is a power outage, the self-charging backup energy system will remember your current timer settings. That way, nothing needs to be reset after the outage. The outlet switch is weather-resistant too, so bad weather won’t interfere with it.

No mounting is necessary for this timer.

3) Honeywell Aube 7-Day Programmable Timer

Despite its name, the Honeywell Aube 7-Day Programmable Timer can be programmed for either seven days or 14 days. There are three different operating modes associated with it too. There is not much flexibility beyond that, though.

The pump can be turned off temporarily, manually, or automatically. If you choose the temporary bypass option, the regular timer is not disturbed as you temporarily override the system.

The timer can stay activated for up to 16 hours per day. You can set the timer for when you want the pump to shut off. The casing is lockable and weather resistant, but you’ll need to purchase a padlock separately.

4) GE 24-Hour Heavy Duty Mechanical Time Switch Indoor/Outdoor

The GE Mechanical Time Switch features a metal case which protects against unwanted tampering and bad weather. You will have secure control over your filter and pump with this time switch.

A licensed electrician may need to be hired for the installation of the time switch, due to the electrical wiring involved.

5) Woods Outdoor 24-Hour Heavy Duty Mechanical Switch

This is a good option if the pool timer is going to be mounted next to a wall outlet. There are very little customization options, but it does have 24 activation settings for each day, and they can repeat as often as you want them to.

A lockable metal box secures the timer inside of it. Additional security exists on the gear train, thanks to the pins which are not removable. Padlock sold separately.

6) NSi Industries Industrial Timer TORK Zip-Set

The TORK Zip-Set Industrial Timer comes with a lifetime warranty. The setup process only requires a single step, and then you can relax. The timer will ask you to enter the zip code of your location. Once you do, a timer program is automatically created which turns your timer on at dusk and off at dawn. Weekday, weekend or weekly schedules can be programmed.

There is a special switch to activate for daylight savings time. Manual overriding is also possible too.

7) GE Z-Wave Plus Direct Wire Smart Switch

Do you like to control things with Alexa? If so, you’ll be able to use Alexa to control the GE Z-Wave Plus. Not only is this a pool timer management system, but it is also an automatic appliance control system too.

There is a metal case included with the Z-Wave Plus which is lockable and resistant to tampering. You can shield the device from hackers with the included security network. If you want to use the Alexa hub, you must purchase it separately. It is a great addition to have with the switch, though. It lets you activate the pump system prior to even going outside.

Conclusion

Time is money in virtually all aspects of our lives. Keeping a pool pump activated is no different. You can save money with an automatic pool timer because your pump won’t be on all the time anymore. Plus, your pool water will still be clean when you get into it.

After you set up the automatic pool timer, you don’t need to do anything else. It’ll take care of everything for you from that point forward.

GE Z-Wave Plus 40-Amp Indoor/Outdoor Metal Box Smart Switch

On Amazon.com
0
suction-pool-cleaners-main

Get a Perfectly Beautiful Pool Every day with a Automatic Suction Pool Cleaner

Best Pool Sweeper You Can Buy in 2020

Do you need to find the best cleaner available? We realize there are a lot of choices out there, so it is important that you make a wise investment and pick one that is right for you. To help you figure out which is the best, we’ve conducted all the difficult research for you.

Below is a list of the top 13 best automatic cleaners of 2019. They’re made by some of the top brands and companies in the industry. Many of them are premium quality cleaners that are best sellers and priced affordably. You’ll find all different types of cleaners to accommodate pools of any shape and size. If that isn’t good enough, then you’ll be happy to know that these cleaners have received positive ratings from other pool cleaner owners like yourself. They can vouch for how well these cleaners have cleared out the debris in their pool easily and automatically.

Best Pool Cleaners

Top Rated: The Best Choice for Automatic Pool Cleaners

1st
Our Score: 9.8/10

1. Hayward PHS41CST AquaNaut

Learn More >>

On Amazon.com
Why we chose it

The Hayward AquaNaut Suction Cleaner is like a 4-wheel drive tank which plugs into your pool pump and uses its suction power to clean the water. A lot of pressure-side cleaners require you to use a booster pump, but that is not the case with the AquaNaut Suction Cleaner. You simply plug it into the existing pump, and that is it. As the cleaner circulates through the water, it will clean both the shallow and deep ends.

You can use the AquaNaut Suction Cleaner for both large pools and small pools. There are 3 throats available to handle debris of all different sizes. The suctioning power can also be adjusted to different levels too. This is great if you have a variable rate pump to use with it.

2nd
Our Score: 9.2/10

2. Hayward Poolvergnuegen 896584000-013

Learn More >>

On Amazon.com
Why we chose it

This Hayward pool vacuum device is a 2-wheel drive cleaner. Its turbine vanes are strong and self-adjusting, giving it added cleaning efficiency. The cleaner has patented tire treads which let it climb the pool’s obstacles and walls without much hassle. Uneven surfaces are not a problem for the tire treads either. Suction is improved in these areas too, due to the adjustable roller skirt feature.

There are many steering sequences which are preprogrammed into this cleaner. The cleaning pattern can also be random as well. Every bit of debris, dust, and dirt is eliminated by this cleaner. Don’t worry about large debris like log palm leaves because it won’t clog this cleaner like it does others.

3rd
Our Score: 9.2/10

3. Baracuda G3 W03000 Advanced Suction Side Automatic Cleaner

Learn More >>

On Amazon.com
Why we chose it

The Baracuda G3 W03000 is strong and pump action suction cleaner. Only One Moving Part allow it to be effective than most other cleaners. Virtually any debris in the water will be eliminated by this cleaner. It can clean your pool’s walls, and floor very quickly.

The cleaner features a FlowKeeper Valve which automates its cleaning performance and manages the flow of water. It is also resistant to scuffs and marks if it were to bump into a hard object. Cleaning around tight corners won’t be a problem either, thanks to its wheel deflector technology.

Perhaps the most impressive innovation of the Baracuda G3 W03000 is its 36-Fin Disc technology. This allows it to move better on the surface of the pool. Just be prepared for the regular maintenance that the cleaner will require, especially after it has cleaned a pool.

Long leaves may be a problem for this cleaner. You should also use caution when cleaning an anti-vortex main drain that is elevated.

4rd
Our Score: 9.2/10

4. Polaris Vac-Sweep 3900 Sport Pressure Side Cleaner

Learn More >>

On Amazon.com
Why we chose it

Many people say the Polaris Vac-Sweep 3900 Sport is the top pressure side cleaner because of how well it performs. The cleaner has an all-wheel PosiDrive system which generates additional torque to clean better and reduce hang-ups. It is recommended for virtually any in-ground swimming pool. If you want the best results possible, use a booster pump.

It has a 2.5” vacuum inlet which boosts its performance. What is even better is its triple-jet suction ability. With this design, extra filtration can be added to capture bigger pieces of debris with little risk of clogging. Its SuperBag is a zippered bag with two chambers which stores all this huge debris. And if the cleaner ever gets stuck, its advanced auto-reverse technology will assist in getting it unstuck.

The Polaris Vac-Sweep 3900 comes with the TailSweep PRO, which is an innovative hose improvement to help eliminate debris and dirt from each corner of the swimming pool. The 31-foot hose kit is a nice included feature, but the hose connections themselves are not the best quality.

4rd
Our Score: 9.2/10

5. XtremePowerUS Vacuum Generic Cleaner

Learn More >>

On Amazon.com
Why we chose it

The XtremePowerUS Vacuum-Generic Cleaner can handle most pool surfaces, such as concrete, fiberglass, and vinyl surfaces. It has great performance efficiency and build quality too. However, you cannot replace the parts of the cleaner once they go bad. On the upside, you’ll rarely need to repair or maintain the cleaner.

To activate the cleaner, it must be connected to the filtration system of the pool. Even though it can clean walls, it tends to get stuck quite often on them. Removing large leaves from the pool will prove to be difficult too. Of course, this is a standard model cleaner which is why it is priced so affordable. It is recommended to use on smaller pools that are between 16 and 32 feet. There are no impressive advanced features with this model, such as a weekly timer or smart navigation. If you want those things, then you’ll need a different cleaner.

What Does a Swimming Pool Cleaner Do?

Dirty pools are not pleasant to be in. However, it can be a challenge to clean the water in your pool. Fortunately, there are innovative technological devices called cleaners which can save the day.

A cleaner is nothing more than a vacuum device which cleans twigs, debris, leaves, dirt, and other contaminants from the water of your pool. This can be an automated or manual cleaner too.

Swimming cleaners exist because of two technologies; water filters and cistern cleaners. The latter cleans cisterns, which are water resistant containers used for storing rainwater and other liquid.

John E. Pattison was the original inventor of the cleaner. This dates back to the early 1980s. He created a device which utilized the water pressure’s suction power to remove sediment and debris from the water without having to drain it. The evolution of this invention turned into the cleaners that everyone uses today.

Picking the Best Pool Sweepers

The cleaner you choose depends on the shape and size of your swimming pool. You must also consider the common type of debris that you need to clean and your overall budget.

Ask yourself these questions:
  • What kind of debris normally falls into your pool?
  • Will you be upgrading or replacing your cleaner?
  • Do you prefer manual or automated?
  • How much can you spend? Can you afford the general cost of a cleaner, which is anywhere from $100 to $800
  • What are the operational costs per month?
  • What features of a cleaner are the best for you?

Three Types of Inground Automatic Pool Cleaners

The three main types of cleaners are pressure, robotic, and suction cleaners. There are good and bad things associated with each one. To choose the best cleaner for your pool, you need to examine the advantages and disadvantages of each type of cleaner.

Suction Side Pool Cleaner

Suction side swimming cleaners are attached to the pool circulation system’s suction side. The force power in which the suction generates is used to propel the cleaner throughout the pool. Meanwhile, the pool surface gets scrubbed, and various sediments are removed from the water, including pebbles and leaves.

Advantages
  • Easy to maintain and repair; few moving components
  • Inexpensive
  • Lasts a long time
Disadvantages
  • Additional wear and tear to the filter must clean every six months
Pressure Side Pool Cleaner

Pressure side cleaners are also referred to as booster pumps. The pool circulation system’s pressure side is where this cleaner gets attached to. When water enters the swimming pool, the pressure causes the cleaner to get pushed around. It removes debris and dirt as it moves through the pool water.

An extra booster pump is required for some models. Fortunately, there is no reliance on the filtration system of the pool here. You just use the filtration bag that comes with it to gather debris.

Advantages
  • Easy to maintain and repair.
  • Inexpensive
  • Pool filter is not put under extra pressure.
Disadvantages
  • Another booster pump may be needed.
  • Must have an activate poop pump for cleaners to function. This creates a higher cost.
Robotic Pool Cleaners

Robotic cleaners run on electricity. Your other pool equipment is not pressured so much. This means it doesn’t get worn down as much. Robotic cleaners are automated, so manual work is not needed for the most part.

Certain robotic cleaner models can clean stairs, walls, and waterlines. You just need to choose the right model for your needs.

Advantages
  • Good energy efficiency
  • Cleaning is easy and no hassle
  • Cleans all areas of the pool; stairs, wall, floor, and cove.
  • Pool circulation equipment is not worn down so much.
Disadvantages
  • More expensive
  • Lots of moving parts = Additional maintenance
  • Must clean filter regularly

Installing a Pool Vacuum Cleaner

The installation instructions are different for every type of cleaner. Just be sure your pool water is clean first before you install your cleaner. This also means having a clean pump basket and filter too.

If you have a suction cleaner, the turn line fittings must be turned down. Connect the hose to the dedicated filter line and then place it under the pool water. Let it fill up.

The hose should have no air in it. After you’re sure of this, connect the hose to the flow gauge. Test the flow and make adjustments where necessary.

Put the cleaner in the pool water. Once the bubbles don’t come out anymore, use the quick connector to connect the cleaner and hose.

Robotic cleaners are very easy to install. Just plug the cleaner into a power outlet and then place it under water.

With any cleaner, look in the instruction manual to see what it says about the installation. That is always the best advice to follow.

Advantages of a Pool Suction Cleaner

There are benefits to every cleaner. Here are their common benefits:

  • Helps prevent water loss
  • Water becomes very clear, enhancing the beauty and health of it.
  • Save energy on automatic cleaners.
  • There are no monthly expenses associated with manual cleaners.
  • Save money by not hiring professional cleaners.
Conclusion

Out of all these cleaners, the most recommended one is the Hayward Poolvergnuegen 896584000-013 The Cleaner. We have installed them on over 200 pools in Calfornia, and by far we found it to be the best performer at of all the other brands, but you should still check out the other cleaners because they might have features which are better for your needs. Their price might be better for you too. And, of course, check out the Amazon customer feedback on the cleaners you’re interested in.

0
_AC_SL1500_

Comfortable, Affordable Relaxation Inflatable Hot Tubs

Best Inflatable Hot Tub You Can Buy in 2020

The Guide to Shopping for Portable Inflatable Hot Tubs

Do you dream about owning a hot spa? You’re probably stopping yourself from getting one because you don’t want to spend the money on a permanent hot tub. If that’s the case, why not try going for an inflatable tub instead? If you have a flat space and an electrical outlet nearby, you can set one up anywhere. You can have an blow up hot tub at a campsite or even inside your garage! The choices are endless.

Don’t expect to see a lot of fancy features in an inflatable spa like you would with a regular spa. Inflatable hot tubs can give you the hot water and bubbles, but you won’t find too many which have water jets or anything else powerful like that. So, consider the features carefully before you settle on an inflatable spa.

Of course, the benefits of owning an inflatable spa speak for themselves. If you rent your home or you’re on a limited budget, and you still want to enjoy a relaxing spa experience, then an inflatable spa is the only way to go. You’ll have the same soothing experience as a regular spa. The big difference is that you won’t need a permanent installation done on the property. Many Inflatable hot tubs are priced under $1,000. Setting up the spa is also very simple too. You won’t even need to hire anyone to help you. If you’re strong enough to carry a deflated hot tub, then it should be an easy DIY task.

Considerations to Make Before Purchasing an Blow up Hot Tub

Don’t expect an portable hot tub to have the same functions as a jacuzzi. But it also doesn’t cost as much either and yet; you can still enjoy a heated bubbly experience in the water.

Okay, so how do you find the best Inflatable hot tubs available? It all depends on your preferences. You need to research certain factors of each hot tub to find the ideal one for you.

Choose the Best Size

Portability is a great thing to have for your hot tub because it allows you to move the hot tub somewhere else if you change your mind about its location. However, if you know where you want to put it, then you need to choose a hot tub size which can fit into that desired space.

Some hot tubs have a width of as little as 180 centimeters. The best place to put the tub is on a flat and leveled surface like a deck, patio, or lawn. Wherever you put the tub, make sure there is a plug outlet nearby. Try not to use an extension cable for something like this.

Capacity

Do you plan to have a lot of people using the hot tub? How many do you think will use the tub at any one time? The standard blow up hot tub has a capacity for 2 to 4 people. Bigger tubs have an 8-person capacity.

Filtration System

It is important to have an advanced filtration system in your hot tub. It needs to have a hard water filtration system so that calcium does not build up in it. This will make maintaining your hot tub so much easier. Then all you’ll really need to worry about is sustaining the right chemistry in the water.

Choose the Best Shape

There are several shape options available for portable hot tubs now. The most common shape of an Inflatable hot tub is round, but there are some square-shaped models available too. If you want a 2-person hot tub, look for the “rowboat” style ones.

Custom design hot tubs like these provide users with additional legroom. That way, users can feel more comfortable and less cramped as they relax in the water together.

Cover

A cover is normally included with any blow up hot tub that you buy. There may even be 2 or 3 covers included with some spa models. Check out the different types of covers they come with too. Some covers are leather, a thermal blanket, insulated, inflatable, or a combination of these. If the interior of the cover is inflatable, it can help trap heat inside the water after you close the tub.

Since you’re using an inflatable spa, you probably won’t be keeping it up for a long term period. That means you won’t need to keep it covered for a long-term period either. As a result, your cover will stay strong for a long time. You won’t need to replace it anytime soon because you won’t be using it too much.

Cover Quality

A cover comes with every  tub. These covers may be an insulated cover, leather cover, or thermal blanket. Sometimes a cover will be a combination of them too.

Therefore, check which type of cover comes with your hot tub before you purchase it Otherwise, you’ll end up having to spend more money purchasing a hot tub cover separately to get the one you want.

Jets

The average number of air jets in an tub is anywhere from 100 to 200. The jets in a regular spa can shoot out powerful water streams. They may even have assistance from air jets too.

If you must have water jets in your tub, then you’ll find some brands which have them. Of course, they’ll have far fewer jets than a regular spa due to the power difference. But at least it won’t be only air jets providing the power.

Ground Cloth

Check which type of ground cloth comes with your tub. This is a sheet which you place on the surface of the ground prior to placing the hot tub on it. Some tubs come with better quality ground clothes than others. The best ground clothes can resist debris, dust, damage, and temperature fluctuation.

Additional Inflatable Hot Tub Features

Look for an I-beam construction in the sides of your tub. This will ensure its sides stay strong and won’t bend. A cushioned floor may be a good feature to look for too. And if there is a digital control panel with an automatic timer, that is even better.

Price

Of course, the price of the Inflatable hot tub will weigh heavily on your mind. Obviously, a tub with a bigger capacity and more features will cost more than a tub with a lower capacity and fewer features. Just weigh your needs versus your budget and make the best choice.

LED lighting and digital control panels are commonly found in most inflatable tubs. These controls let you perform basic actions like adjusting the temperature, timer, or jet settings. If you can find a tub which lets you alter these settings from inside of it, then that’s even better.

Heaters

You must have a heater to generate heat for your portable hot tub. The only question is, how hot do you want it to be? The hot tube temperature should not go over 104°F if you want to remain safe. The Consumer Product Safety Commission has set this recommendation too because it reduces the chance of heat stroke and drownings from excessively hot water.

Tips for Heating

The ideal spa temperature for most people is 100°F to 102°F. Any spa heater should be able to do this. However, make sure you know how your hot tub can sustain that temperature, especially after maintaining the tub.

When you’re not using your hot tub, cover the water with the included cover. If the hot tub is placed outside, things like shrubs and privacy screens can help stop the water from evaporating. They can also help keep the water hot too. That way, the heater has less stress put on it.

It should take anywhere from 12 to 24 hours for the water of the inflatable spa to completely heat up.

Control Panel

Portable hot tubs do come with some useful features, such as digital control panels, LED display lighting, and adjustable settings for things like heat timer, temperature, and jets.

It is important to find a portable spa which lets you access the control panel from inside the tub. You probably wouldn’t like getting out of the water and going to the pump to access the heat settings. Some models force you to do this, so you need to be aware of that.

Water Pumps

No other component is as important to your portable tub as the water pump. The circulation of the water in your spa depends on the pump. It has an air blower built into it which energizes the jets and inflates the tub.

One container houses the heater and pump. They’re enclosed to protect its electrical components from being exposed to water. The control panel is usually located on the top of the enclosure where the pump is installed.

To prevent the chance of electric shock, a ground fault circuit interrupter is built into the unit which comes with a 120V power cord. Any standard electrical outlet inside or outside your house should be compatible with this. Just be sure the assigned breaker is not sharing the electricity with anything else, or it may flip as you’re in the spa.

Setbacks to Purchasing Portable Hot Tubs

Inflatable hot tubs are certainly beneficial in a lot of ways, but they also have some downsides too. Fortunately, there aren’t too many downsides. Below is a list of them just so you’re aware of what to expect.

Loud Noise

When you inflate a portable spa, the air makes a lot of noise. In the enclosed heater and pump, there is a built-in air blower which is used with a hose to send air into the spa. After the inflation is completed, activating the bubbles creates a lot of noise too.

If you put your inflatable spa inside of a small space, like your garage or sun-room, then it will cause the sound to be amplified. That’s not to say that all inflatable spas are loud and noisy. You’ll probably be able to tolerate the noise, but you should at least know to expect it before setting up the spa.

Limited Seating

Standard hot tubs have seats available. Unfortunately, blow up tubs do not. All you’ll have is a padded floor on the bottom that everyone sits on.

If a short person or child tries sitting on the floor, their face may end up underwater. They’ll have to resort to standing or kneeling in order to get comfortable. If there are I-beam reinforcements on the inflatable spa, then people have the option to sit down on the sides and not worry about leaks or damages being made.

Of course, you have the option to purchase extra seating or padding for the bottom if you want.

Warranty Length

You may think that something big and pricey like a spa would have a 1-year warranty which covers defective parts. Unfortunately, that is not the case with most tub models. You may find some that come with partial warranties which last for 30 days. This means if you only use your spa one time, the warranty will run out before you likely use it again.

Filters Don’t Last Long

Blow up hot tub maintenance is not hard. Every couple of days, you just rinse the filters with a hose and remove the debris from them. But these filters will only last a few weeks before they need to be replaced. They don’t last for years like standard hot tub filters.

Also, the filter is not always located in a convenient place. If it is inside the pump and heater area, then you’ll be able to access it quickly. But if the filter is inside the bottom of the tub, then changing the filter becomes a bigger hassle. You’ll need to open the pump and replace the filter.

Best Inflatable Hot Tub

Below is a list of the top-selling and highly acclaimed inflatable tubs:

Top Rated: The Best Choice for Inflatable Jacuzzi

1st
Our Score: 9.8/10

Coleman SaluSpa Inflatable Hot Tub Spa

Learn More >>

On Amazon.com
Why we chose it

Our best pool choice. The Intex Swimming Pool is very easy to install, and it’s even easier to maintain. It is a popular small pool which is affordable and suitable for up to 4 people. You can assemble and disassemble this pool quite easily too. This is great if you want to move your pool around to different places regularly. Just deflate the pool, dry it out, pack it up, and store it.

The pool has durable sidewalls made from heavy-duty vinyl. This durability allows the pool to last for a minimum of a couple of sessions. There is no pool cover, filter pump, or ground cloth included with this 8’ x 30” model.

2nd
Our Score: 9.2/10

Intex Inflatable hot tub 77in PureSpa Portable Bubble Massage Spa Set

Learn More >>

On Amazon.com
Why we chose it

Our second best pool choice. The Intex Ultra Frame Pool Set is 14 feet, which is big enough to accommodate up to 4 people. It comes with all your essential pool items, including a debris cover, filtration pump, ground cloth, and removable ladder.

The pool set contains “ultra” frames made of durable steel that is resistant to rust. The frame has very wide legs which stabilize the pool, especially on soft ground. If a few people set up the pool together, they can do it very quickly. For those who’d rather keep the pool set up in one place for the entire year, you can do that too. Although, it is not recommended.

Hot Tubs: Portable Vs. Permanent

Hot tubs have several benefits. Lots of people continue to purchase the standard permanent hot tubs, though. Are they better? Let’s compare them to the portable ones.

Portability

Regular hot tubs are called “built-in tubs,” “fixed tubs,” and “traditional tubs.” They are not movable or portable, though, so you need to dedicate space on your property to the tub if you have one installed. Portable tubs are easier to set up and store away in any space that is available. That is why they are loved so much.

Remember that regular tubs cannot be moved once you install them somewhere. If you’re somebody who changes their mind regularly, then a portable tub is a better investment because you can keep switching spaces.

If you want to take a portable tub on a camping or fishing trip, you can just deflate it and put it in a carrying bag to take with you. Portable tubs may not have the most features, but they give you the most mobility. It all depends on what you care about more.

Construction

Portable hot tubs are constructed from PVC shells or acrylic material. This makes them feel very smooth when you sit inside the tub. Not only that but cleaning them is also simpler too.

The foam insulation of the hot tub keeps it lightweight enough to move while remaining durable too. The “I-beam” vertical construction of the hot tub makes it firmer too. It can resist your average scrapes and punctures, but it can still be punctured if impacted too severely.

Regular fixed hot tubs have concrete or cement at its bed to keep it in place. There are other materials available for these hot tubs too. But they will never be as smooth as PVC vinyl.

Inexpensive

Portable tubs are much cheaper than regular tubs. And if you choose the Inflatable hot tub kind, they’re even less expensive. If you want to save even more money, choose a hot tub which holds four people instead of 6 people.

Maintenance

Portable hot tub maintenance is quite simple to achieve. In fact, it is no different to maintain whether you have a hard-shell or inflatable version of a portable tub. If there is a quick drain mechanism or an advanced filtration system, it is even easier to maintain the tub.

Regular hot tubs tend to cost more because more materials are used to make it. In addition, you need to spend money hiring a professional installer to install the hot tub. Sometimes this requires you to hire both plumbers and electricians too. And if there are ever any problems with these areas of the hot tub, you need to spend even more money to get these problems fixed. Portable hot tubs won’t have any of these expenses.

Tips before Purchasing a Inflatable Hot Tub

Heater

The heater and pump are not made to provide heat and bubbles to the tub water simultaneously. Because of this, you’ll quickly get cold in the winter as the temperature drops.

The way to solve this issue is to create a propane water heater of your own. This will be a separate unit from the water pump. But if you’re not a do-it-yourself type, then get someone else to set this up for you.

Pay attention to the temperature rating of your heater and pump. They’re generally safe to use when it is over 40°F outside.

Accessories

Portable hot tubs are not much to look at in comparison to standard hot tubs. You won’t find integrated lighting, sound systems, or stylish wooden cabinets in them. However, you can still do a few things to enhance their attractiveness. All you need are a couple of aftermarket accessories, and you’ll turn your plain looking spa into a luxurious spa.

Seat Cushions

You may not want to sit on hard plastic seating in your portable spa. If you want something more comfortable to sit on, use seat cushions. Not only are they soft and comfortable, but they’ll increase your height in the water as well. This is very useful for a short person who wants to bathe in the spa with bigger people.

Headrests

There are not too many headrests which come with an tub. If you require more support for your neck, then you can purchase some vinyl headrests to use. They get filled with water and air to create the necessary weight which secures them in place. Meanwhile, you can adjust them easily if you need to.

Drink Holders

There aren’t too many cup holders built into a portable spa, but this doesn’t mean you can’t add your own. There are trays and cup holders which you can purchase separately and attach to the upper portion of the spa. Then you can reach them right from where you’re sitting.

LED Lights

If you want to bring more light and beauty to your portable hot tub, then purchase some LED lights which are totally submersible and battery-powered. You can find all sorts of colors, shapes, and sizes for these LED lights. Some of them can even be controlled remotely too. This control allows you to alter the light mode, color, and intensity.

Solar Cover

Solar blankets can be used on any type of spa or pool. They are often trimmable, so you can adjust the size of the blanket to fit perfectly over your portable spa water. The blanket floats on the water and prevents the chemicals and heat in it from escaping. It also prevents debris and bugs from getting into the water too.

Sanitation

Your spa water must remain clean so that people stay safe as they bathe. This is the most important part of your maintenance duties. Just don’t expect it to be easy because there are hundreds of gallons of water which can easily be contaminated with bacteria.

First, you need to ensure the chemicals in your spa water are balanced. The chemicals and test strips that you would use in a permanent spa can also be used in an inflatable spa.

Read the instruction manual and see what it states about sanitizers. The manufacturer of your Inflatable hot tubs may forbid the use of chlorine tablets in the water. Although, some inflatable spas come with a floating chlorinator that you’re supposed to use alongside the tablets. Then you have tubs which come with salt water sanitizing systems.

If you don’t have the correct level of sanitizer in your spa water, then anyone who goes in the water runs the risk of obtaining a variety of health issues. They may develop folliculitis rashes or something much worse Legionnaires’ disease.

Don’t take the cheap way out by skipping the chemicals, even if you’re not using the spa for very long. The correct level of sanitizer ensures the health and safety of everyone in the water.

Where to Setup the Portable Inflatable Spa?

You may be eager to take a soak in your portable hot tub, but have you thought about where you’re going to set it up? Don’t just put it anywhere because the surface must be strong enough to handle the weight of the tub, whether it’s outdoors or indoors. For this reason, avoid placing the spa on a wooden deck. A concrete patio would work better or better yet, a flat area of your backyard.

An empty portable spa can weigh anywhere from 65 to 100 lbs. Some models come with handles to make it easier to carry them around. If you find heavier ones, they’re typically meant to use for a longer time. Regardless, an portable tub that is filled with water will weigh between 2,000 and 3,500 lbs. This also includes the weight of the people in the spa too. So, the surface where you place your spa would have to be strong enough to hold the equivalent of a car’s weight.

Another thing to consider is whether you’re setting up the portable spa during the wintertime. The temperature of your environment is important because most portable spas are suitable to use when the temperature is over 40°F. If the temperature ever falls under this number, then your heater and pump could suffer for it. For this reason, you need to shelter your spa during the colder months of the year that you want to use it. Some people like to put the spa in their garage and then install some additional insulation to keep it warm. The insulation can go around the spa or even under the spa for added protection.

Setting Up the Portable Spa

What type of portable spa do you have? Is it going inside or outside? Do you have a level surface to put it on? These things will determine how you set up the spa. Below are the steps for setting up a spa in any location.

Look for a location that is near an electrical outlet. Just make sure that splashed water won’t reach it. Also, there needs to be a drainage system in place to handle the splashed water. Ventilation must be present in the room if you install the spa indoors. That way, humidity won’t get trapped in there and cause mold to form.

  • Clean the location where you want the spa to go. Remove debris and sharp objects from the surface. This ensures nothing gets stuck beneath the spa as you’re soaking in it.
  • Take out all the contents from the container of the spa package. Find the ground blanket and place it on the surface of the location you’ve selected. This will give added protection to the spa.
  • The heater and pump can now be assembled on there first.
  • Place the portable spa on the cloth. Connect the pump and hose to the portable spa and start to inflate it.
  • The control panel can be installed if it comes separately.
  • Set up the air filters. Check the drain and make sure it is closed.
  • Start adding water to the tub.
  • After it is filled up, use sanitizer in the water to balance the chemistry in there.
  • Cover the hot tub with the cover which came with it. Activate the heater and wait up to 24 hours.
  • Check the water, and it should be at a good temperature for soaking. Get in and have fun.

Safety Tips for Blow Up Hot Tub

There may be safety laws set in your state which govern how an Inflatable hot tub can be used there. If you need to research these laws, ask the local code enforcement office in your city or town.

If there are no safety laws to worry about, then you should still abide by the recommendations of the CPSC. You should never take a chance when it comes to the health and safety of those using the tub.

If you want to use your portable spa quickly and wish to save time, there is an attachment you can purchase which lets you connect your home’s hot water to the fill hose of the spa. This means you’d be using the water heater of your home to fill the spa with hot water. Remember that house water heaters can get hotter than 120°F. Most manufacturers recommend you don’t let the water get this hot, so make sure you monitor this carefully.

An outdoor hose can be used to fill your spa in the beginning. After you fill it up about 66% of the way, you can use your home’s hot water to fill the rest. That way, it won’t require as much time to heat up the temperature of the spa water.

Cleaning and Maintenance

It is easy to maintain a portable spa, but you must keep maintaining it if you keep it up for a while.

Filtration

Portable spas don’t have the most thorough filtration systems like standard spas do. That is why skimming the spa water regularly is recommended. Every couple of days, take out the filters from the spa and rinse them out with fresh water. You’ll need to replace the filters after a couple of weeks. You’ll know when it is time to replace the filters because they will appear discolored or hardened. Detergents or other cleaning products should not be used to clean away grime from the filter. If you use these cleaning agents, your spa water will get filled with foam. Plus, your filter will get cluttered with gunk and force the pump to work extra hard.

Draining/Refilling

The water in your portable spa must be drained and refilled every 1 to 3 months. If the spa is used a lot, then you may need to change the water sooner. To know when it is the right time to do this, look for cloudiness in the water, imbalanced water chemistry, or foaming. If you see anything like this, then change the water immediately.

When you want to empty the Inflatable hot tub, connect a hose to the drain valve. The water will take some time to completely flow out of there. Make sure the water drains into someplace sanitary, like a sewer. Don’t use a natural body of water or a storm drain to dump this water into because the contaminants and chemicals in the water are toxic to fish, plants, and other wildlife that may drink it.

Once the water is out of the tub, use a sponge, mild soap and warm water to wash the interior of it. Don’t use abrasive cleaners like steel wool or powders. Ensure all the soap suds are rinsed out of the spa so that foaming doesn’t occur later. If the filters are installed in the floor area, then clean or replace them now before refilling the tub.

If the hot spa is damaged and has a leak, then you need to pat it dry. Use the patch kit which is included with your portable hot tub to fix the leak. If you don’t have one, you can order patches over the internet. Follow the instructions of the patch to apply it correctly.

Inflatable Hot Tub Storage

Your deflated hot tub needs to be completely dried off before folding it up and storing it away. Use a sealed container or its original box to store the tub in. Place the box or container in a dry environment with no sunlight or pests. Don’t store the tub in a carrying case or bag because they’re not designed to give it long-term protection. You need a tightly sealed container which can protect the vinyl material for a long time.

As you can see, setting up, maintaining and storing an inflatable spa is not that difficult at all. Inflatable spas are the most affordable and easiest ways to enjoy the benefits of a hot soak by yourself or with your friends and family.

0